Руководство Пользователя для Videolarm qodc2-50na
- 2 -
CAMERA SETTINGS
SERIAL NUMBERS BEGINNING WITH YK
FIXED AND FIXED VARI-FOCAL LENSES. There are no user
adjustable settings on these units (Figure 4).
adjustable settings on these units (Figure 4).
Figure 4
AUTO IRIS LENSES. The dip switches are factory set with AES
off and backlight compensation on (Figure 5). The auto iris is also
set at the factory, but an adjustment screw is included for use if
needed. See page 10 for instructions on adjusting Auto Iris.
off and backlight compensation on (Figure 5). The auto iris is also
set at the factory, but an adjustment screw is included for use if
needed. See page 10 for instructions on adjusting Auto Iris.
Auto Iris
adjustment
screw
adjustment
screw
AES Default Off
Backlight
Compensation
Default On
Compensation
Default On
Figure 5
BW Fixed and Vari-Focal
BW Auto Iris
NOTE: To determine which camera is used in your unit, locate the
serial number on the inside of the housing. Match the two
letter prefi x with the corresponding instructions included
here for adjustments.
The operational settings for the camera are defi ned by ten dip
switches located on the PC Board (Figure 6). Moving the switches to
the on position will activate each setting. Factory defaults are pictured
below (Figure 7 and 8).
FACTORY DEFAULT FIXED AND FIXED VARI-FOCAL LENSES:
Dip Switches 5 and 7 on, all others off.
Dip Switches 5 and 7 on, all others off.
Figure 7
FACTORY DEFAULT AUTO IRIS LENSES:
Dip Switches 3, 5 and 7 on, all others off.
Dip Switches 3, 5 and 7 on, all others off.
Figure 8
Figure 6
Hi-Res Color, Fixed and Vari-focal fi xed lenses
Dip Switches
Auto Iris
adjustment
screw
adjustment
screw
DO NOT
ADJUST
ADJUST
Factory
Use Only
Use Only
Connection to
Power Board
Power Board
NOTE: Dip switches are factory pre-set for optimum performance.
In certain specifi c instances it may be necessary to adjust
one or more settings. Consult a qualifi ed technician before
making any adjustments. A Dip Switch settings chart is
available on the next page.
In certain specifi c instances it may be necessary to adjust
one or more settings. Consult a qualifi ed technician before
making any adjustments. A Dip Switch settings chart is
available on the next page.
SERIAL NUMBERS BEGINNING WITH MC
Vari-Focal Lens: First, adjust the Magnifi cation Lock Screw to the
desired magnifi cation (telephoto to wide angle). Tighten the Lock
Screw. Next, adjust the Focus Lock Screw until a clear picture is
achieved. Tighten the Lock Screw (Figure 3).
desired magnifi cation (telephoto to wide angle). Tighten the Lock
Screw. Next, adjust the Focus Lock Screw until a clear picture is
achieved. Tighten the Lock Screw (Figure 3).
Figure 3
Magnifi cation lock screw
Focus lock screw
Fixed iris vari-
focal lens
focal lens
Auto Iris Lens:
NOTE: THE AUTO IRIS LENS IS SET AT THE FACTORY.
NOTE: THE AUTO IRIS LENS IS SET AT THE FACTORY.
• IF YOU EXPERIENCE VIDEO TOO LIGHT OR DARK
AUTO IRIS ADJUSTMENT MAY BE NEEDED.
AUTO IRIS ADJUSTMENT MAY BE NEEDED.
SEE THE TROUBLESHOOTING SECTION FOR
ADJUSTMENT INFORMATION.
ADJUSTMENT INFORMATION.