Руководство Пользователя для Vitek vt-ptz10

VT-PTZ Series 

6 

 

 

z  Before using the Xpress Dome, please ensure that you read and understand the 

safety precautions described below.  Always ensure that the Xpress Dome is 
operated correctly.   

z  The safety precautions noted on the following pages are intended to instruct you 

in the safe and correct operation of the Xpress Dome and its accessories to 
prevent injuries or damage to the self, other persons and equipment. 

z  In this Instruction Manual, the term “Speed Dome”, “equipment” and “device” 

refers primarily to the Xpress Dome and its accessories such as power supply 
and its remote controller.   

 
WARNING 

 
z  Do not cover the ventilation opening or slots on the outer casing.  To prevent the 

Speed Dome from overheating, provide at least two inches of air space around 
the vent and the slots.   

z  Do not drop metallic parts through slots.  This could permanently damage the 

Speed Dome.  Immediately turn the Speed Dome’s power off or unplug the 
power cord from the power outlet.  Contact a qualified service personnel 
authorized by the equipment distributor or a Vitek customer help desk.   

z  Do not attempt to disassemble or alter any part of the equipment that is not 

expressly described in this guide.  Disassembly or alteration may result in high 
voltage electrical shock.  Internal inspections, alterations and repairs should be 
conducted by qualified service personnel authorized by the equipment distributor 
or Vitek customer help desk.  

z  Stop operating the equipment immediately if it emits smoke or noxious fumes.  

Failure to do so may result in fire or electrical shock.  Immediately turn the 
Speed Dome’s power off, remove the power cable from the power outlet.  
Confirm that smoke and fume emissions have ceased.  Please consult the 
Speed Dome distributor or the closest Vitek customer help desk.   

z  Stop operating the equipment if a heavy object is dropped or the casing is 

damaged. Do not strike or shake.  Failure to do so may result in fire or electrical 
shock.  Immediately turn the Speed Dome’s power off or unplug the power cord 
from the power outlet.  Please consult the Speed Dome distributor or the closest 
Vitek customer help desk.   

z  Do not allow the equipment come into contact with, or become immersed in, 

water or other liquids.  Do not allow liquids to enter the interior.  The Xpress 
Dome has not been waterproofed.  If the exterior comes into contact with liquids 
or salt air, wipe it dry with a soft, absorbent cloth.  In the event that the water or 
other foreign substances enter the interior, immediately turn the Speed Dome’s 
Power off or unplug the power cord from the power outlet.  Continued use of the 
equipment may result in fire or electrical shock. Please consult the Speed Dome 
distributor or the closest Vitek customer help desk.