Краткое Руководство По Установке для VTech i6735

Make sure your phone’s packaging includes the following:

1.  Align  the  two  holes  in  the  plug  with  the  socket  pins, 

then  snap  the  plug  into  place.  Place  the  battery  in  the 

compartment with the wires in the upper right corner.

2.  Replace  cover  by  sliding  it  upwards  until  it  clicks  into 

place.

1.  Place the handset in the base unit/charger.
2.  Charge the battery for at least 16 hours before first use.

Plug the power adaptor into an electrical outlet not controlled 

by a wall switch, and the connector into the power jack on 

bottom of the telephone base/charger.

•  Use only the power adaptors supplied with your 

VTech telephone.

Plug one end of the telephone line cord into the telephone line 

jack at the bottom of the telephone base. Then plug the other 
end of the cord into the wall telephone outlet.

If your product is not working properly:

1.  Refer to your user’s manual.
2.  Visit our website at www.vtechphones.com or 
 

www. vtechcanada.com in Canada.

3.  Call our customer service at 1-800-595-9511 or 
 

1-800-267-7377 in Canada.

Press 

OFF or place the handset in its 

base/charger.

For complete feature instructions, please refer to your 

user’s manual.

Base unit 

Handsets (3)

Telephone 

line cord 

Batteries (3) 

Belt clips (3)

Wall mount 

bracket

Base power adaptor

Charger power adaptor (2)

User’s manual

Charger (2)

Quick start 

guide

•  Press 

TALK/FLASH  or  SPEAKER  and  listen  for  dial 

tone.

•  Dial the phone number.
-OR-
•   Dial the phone number. 
•   Press 

TALK/FLASH.

Press 

TALK/FLASH,  SPEAKERPHONE,  or  any  dialing  key 

except 

OFF.

96-00xxxx-010-000

Issue 0