Инструкция для Sony DSC-U30

Скачать
Страница из 84
60
Shooting still images/movies
The power turns off 
suddenly. 
• If you do not operate the camera for about three 
minutes when using batteries, the camera turns 
off automatically to prevent wearing down the 
batteries (page 14).
• The batteries are discharged.
p Turn on the camera again (page 14).
p Replace them with charged batteries (page 10).
Symptom
Cause
Solution
Symptom
Cause
Solution
The subject does not appear 
on the LCD screen.
• The mode switch is set to 
.
p Set the mode switch to 
 or 
 (pages 20 and 41).
The image is out of focus.
• The subject is too close. 
• When shooting still images, 
 (Illumination 
snap mode), 
 
(Twilight mode), 
 
(Vivid 
nature mode), or 
 (Active outdoor mode) is 
selected for the Scene Selection function.
• You are shooting movies at a distance closer 
than 1.0 m (3 feet 3 3/8 inches).
• The Focus preset function is selected.
p Make sure to position the lens farther away from the subject 
than the minimum shooting distance of 10 cm (4 inches) when 
shooting (page 30). 
p Cancel the Scene Selection function (page 29)
p Select the Focus preset function (page 30).
p Set it to [AUTO] (page 31).
The image is too dark.
• The LCD screen is too dark.
p Set [LCD LIGHT] to [ON] (page 21).
The image is too bright. 
• The LCD screen is too bright.
p Set [LCD LIGHT] to [OFF] (page 21).
The image is monochrome 
(black and white).
• [P.EFFECT] is set to [B&W] mode. 
p Cancel [B&W] mode (page 32)
Vertical streaks appear 
when you are shooting a 
very bright subject.
• The smear phenomenon is occurring. 
p This is not a malfunction.