Руководство Пользователя для Voxson gps400

GPS400 User Manual 

Congratulations on purchasing your new Voxson GPS400 GPS Navigation System.  The following 
manual will demonstrate how to install and use your GPS400 device as well as detail the operation, 

functions, and features of the Destinator navigation software. 

Please note that the GPS400 must be mounted in the vehicle such that is does not interfere with the 
driver’s view or operation of the vehicle’s controls.    The device must also not be mounted in the 

deployment area of the vehicle’s airbags (if fitted). 

 

1.  To assemble your car holder kit, first attach the cradle to the suction-mount gooseneck bracket. To 

complete this start by orienting the bracket such that the lever at the base is facing upwards.    Place 

the cradle onto the bracket ensuring that the tabs on the bracket align with the holes in the cradle 
(A). Slide the cradle downwards (B) until a loud “click” is heard. 

 

 

 

 

2.  Place the car holder kit in a suitable location on your windscreen 

ensuring that the lever at the base of the bracket is switched 
such that it is away from the glass.    The area of the windscreen 

where the bracket is to be mounted should be cleaned with an 

alcohol based cleaner prior to attaching the bracket.    The best 
location for the device is usually in the centre of the vehicle at 

the bottom of the windscreen. 

 

 

 

 

 

3.  Whilst firmly pressing the bracket against the glass, push the 

lever back into place against the base of the bracket.    Once 

fitted, pull gently on the bracket to check that the suction 

mount is secure.   

 

 
CAUTION: Do not place any force on the cradle itself as it can 

be easily broken.