Справочник Пользователя для JVC GR-DVP9

Скачать
Страница из 150
Master Page: Left-start
10
 
EN
GETTING ST
AR
T
E
D
This camcorder’s 2-way power supply system lets 
you choose the most appropriate source of power. 
Do not use provided power supply units with other 
equipment.
Charging The Battery Pack
1
Make sure you unplug the camcorder’s DC cord 
from the AC Power Adapter/Charger.
2
Plug the AC Power Adapter/Charger’s power cord 
into an AC outlet. The POWER indicator lights.
3
Attach the battery pack with the YZ mark 
aligned with the corresponding marks on the AC 
Power Adapter/Charger. The CHARGE indicator 
begins blinking to indicate charging has started.
4
When the CHARGE indicator stops blinking but 
stays lit, charging is finished. Remove the battery 
pack by pushing up the protruding part.
5
Unplug the AC Power Adapter/Charger’s power 
cord from the AC outlet.
NOTES:
● If the protective cap is attached to the battery 
pack, remove it first.
● If you connect the camcorder’s DC cord to the AC 
Power Adapter/Charger during battery charging, 
power is supplied to the camcorder and charging 
stops.
● When charging the battery pack for the first time 
or after a long storage period, the CHARGE 
indicator may not light. In this case, remove the 
battery pack from the AC Power Adapter/Charger, 
then try charging again.
● If the battery operation time remains extremely 
short even after having been fully charged, the 
battery is worn out and needs to be replaced. 
Please purchase a new one.
● For other notes, 墌 pg. 64.
About Batteries
Lithium-ion is vulnerable in colder temperatures.
DANGER! Do not attempt to take the batteries apart, 
or expose them to flame or excessive heat, as it may 
cause a fire or explosion.
WARNING! Do not allow the battery or its terminals 
to come in contact with metals, as this can result in 
a short circuit and possibly start a fire.
The Benefits Of Lithium-Ion Batteries
Lithium-ion battery packs are small but have a large 
power capacity. However, when one is exposed to 
cold temperatures (below 10°C), its usage time 
becomes shorter and it may cease to function. If this 
happens, place the battery pack in your pocket or 
other warm, protected place for a short time, then 
re-attach it to the camcorder. As long as the battery 
pack itself is not cold, it should not affect 
performance.
(If you’re using a heating pad, make sure the battery 
pack does not come in direct contact with it.)
Power
Battery pack
Charging time
BN-V107U
Approx. 1 hr. 30 min.
BN-V114U
(optional)
Approx. 2 hr.
POWER 
indicator
(red)
CHARGE 
indicator
(green)
Battery 
pack
Protruding part
To AC outlet
AC Power Adapter/
Charger
DC OUT connector
GR-DVP9-8PAL.book  Page 10  Friday, February 7, 2003  12:35 PM