Руководство Пользователя для Talkswitch TS-480i

 Model TS-480i Installation Guide

 5

The TS-480i can be setup to share a network connection with another 
network device. Power can be provided by an 802.3af compliant 
network power source or with a PoE inline power injector (optional 
accessory). It can also be installed on a desk or mounted on the wall. 

The phone can be set up as a direct network connection to the Ethernet wall 
jack or as a shared network connection as a pass-through if connecting a 
computer or another network device to the phone. 

Located at the back of the phone are two fully switched 10/100 Mbps 
Ethernet cable ports. The port marked with 

l is used to connect the 

phone to the network, as well as provide power to your phone. For more 
information, see “Connecting to the network and to Power.” 

To connect a network device (such as a computer) to the phone, connect an 
Ethernet Cable into the network port on the back of the phone marked 
with 

;. Plug the other end of the Ethernet Cable into the network port on 

the network device you are sharing the network connection with. 

Note: The 

;

 jack on the TS-480i does not supply inline power onto other network 

devices. All Ethernet cables used must be category 5/5e straight-through 
cables, such as the cable provided with your phone.

 

Ethernet
  Cable

Other Network Devices

Separate 
 Network
    Jack

      Network Jack

(if Inline power provided)

To Network