Руководство Пользователя для Talkswitch TS-480i

 Model TS-480i Installation Guide

 11

An admin password may be required in some cases to access or configure 
specific parameters on the phone. The default password is 22222. Once 
TalkSwitch has provisioned the phone, the new admin password is 23646 
(spells ADMIN).

When connecting your IP phone to the same LAN as TalkSwitch, first 
ensure you have already configured this extension’s information and MAC 
address in the TalkSwitch configuration software. Once configured and 
saved to TalkSwitch, connect the phone to the LAN then power it up. It will 
automatically detect TalkSwitch on the LAN and configure itself. 

When connecting your IP phone at a remote location for external use, 
please perform the following steps:
1. Pre-configure the extension in the TalkSwitch configuration software 

and include the MAC address of the phone.

2. Before or after deploying the phone, power up the phone and select 

Options, then Network Settings. 

3. Enter the administrative password for the phone set. If no password has 

been previously set by your phone System Administrator, enter a 

password of either ‘22222’ or ’23646’.

4. From the Network Settings menu, select TFTP Server then Primary 

TFTP. Enter the WAN (External) IP address or URL/ FQDN of your 

TalkSwitch location.

5. Press Done then reboot the phone. It then connects to the TalkSwitch

system and updates its configuration. 

If you encounter problems, please ensure the appropriate ports are 
forwarded from the router to the TalkSwitch unit acting as the proxy at that 
location; for more information, see the TalkSwitch User Guide. There 
should be no need to make any adjustments to the firewall at the IP 
phone’s location.

There is a list of configuration options, accessed by pressing the 

wbutton. 
1. Press 

wto enter the Options List.

2. Use 

s and r to scroll through the list of options.

3. Press the Show softkey, the 

4 button or press the digit number of the 

corresponding option to select an option.

4. Use the softkeys to change a selected option.
5. Press the Done softkey at any time to exit the option and save the change.
6. Press the Cancel softkey, the 

3 button or the y button at any time 

to exit without saving changes.