Руководство Пользователя для DataCard 285
6-14
Troubleshooting
#
Obtain guidance from service before performing this task.
User’s Guide for the Magna™ Class Printer
Overlay patch is wrinkled
on the card.
on the card.
Supply roll is not pushed
firmly onto supply spindle
or take-up spool is not
pushed firmly onto take-up
spindle.
firmly onto supply spindle
or take-up spool is not
pushed firmly onto take-up
spindle.
The supply spindle needs
adjustment.
adjustment.
Load the overlay supply
again. See
again. See
Contact your service
representative.
representative.
Particles appear between
card and overlay.
card and overlay.
The inside of the printer is
dirty.
dirty.
The heated roller is dirty.
The supplies were
mishandled.
mishandled.
The supplies are not
Datacard-recommended.
Datacard-recommended.
The printer is being used
in a dirty environment.
in a dirty environment.
Use a printer cleaning card
and then use a duplex/
overlay cleaning card. See
and then use a duplex/
overlay cleaning card. See
.
Clean the heated roller. See
.
Store supplies in a clean
environment. Keep supplies
in packaging until loaded in
the cartridge.
environment. Keep supplies
in packaging until loaded in
the cartridge.
Obtain and use Datacard-
recommended supplies.
recommended supplies.
Move the printer to a clean
environment or clean the
environment.
environment or clean the
environment.
Table 6-3: Overlay quality problems
What you see
Possible causes
Solutions
-DQH 'RH
V
MagnaUserGuide.book Page 14 Friday, May 5, 2000 1:09 PM