Руководство Пользователя для Optima g200

with a 1/8" (3.5 mm) stereo mini-plug in order to fit into the stereo line-in jack of your
notebook PC.
In order to connect a external audio source follow these easy steps:

1. Align the connector with the port opening.
2. Push the connector into the port until it is seated.

The stereo line-in jack will not support an external microphone.

Turn down the audio volume when connecting electronic devices
to the line-in jack. The internal speakers might break if
unexpected large sounds are inputted.

The optional optical digital audio-out connector allows you to download digital audio to
MiniDisc recorders. It uses SPDIF (Sony Philips Digital Interface) format. Please use
the following setting when using the digital audio-out connector.

1. Click on Start, Settings and then click on Control Panel.
2. Select Yamaha Ds-XG Audio Configuration.
3. Click on the SPDIF tab and click ON (Digital Sources Only). If you don’t see this

setting, the optical digital is always on by default.

Do not look into the connector. There is a beam coming out from
the SPDIF connector, so do not look into the connector when
inserting the cable, otherwise you may damage you sight.

The frequency of the digital sound output from the SPDIF output
connector is fixed to 48KHz. If a sampling rate convertor is not
installed in your connecting digital electronic device (e.g., MD
player), recording is not possible. Please see the user manuals for
the electronic devices for further details.
The sound recorded through connecting a digital electronic device
(e.g., MD player) to the SPDIF output connector cannot be used
as digital output. All output data from the SPDIF output
connector has copyright protection information included.