Инструкция С Настройками для Konica Minolta Z10

ETTING UP AND RUNNING

CHANGING THE MEMORY CARD

An SD Memory Card or MultiMediaCard must be inserted for the camera to operate. If
a card has not been inserted, a no-card warning is displayed on the monitor. For more
about memory cards see page 114.

Always turn off the camera and confirm the access lamp is not lit
before removing a memory card; damage and data loss may result.

1.Insert the memory card all the way into the card slot and release; the card should

catch in the slot. Insert the card so the face is toward the back of the camera. Always
push the card in straight, never at an angle. Never force the card. If the card does not
fit, check that it is oriented correctly.

2.To eject a memory card, press the card into the slot and release. The card can then

be pulled out. Take care when removing the card as it becomes hot with use.

A memory card used in another camera may have to be formatted before being used. If
the unable-to-use-card message appears, the card should be formatted with the
camera. A memory card can be formatted in section 1 of the playback menu (p. 74).
When a card is formatted, all the data on the card is permanently erased. If the card-
error message appears, press the central button of the controller to close the window;
check the Konica Minolta web site for the latest compatibility information:

North America:

http://www.konicaminolta.us/

Europe:

http://www.konicaminoltaeurope.com/