Инструкция С Настройками для Konica Minolta Z10
59
The flash range is measured from the CCD. Because of the optical system, the flash
range is not the same at the lens’ wide-angle position as it is at the telephoto position.
range is not the same at the lens’ wide-angle position as it is at the telephoto position.
CAMERA SENSITIVITY - ISO
FLASH RANGE AND CAMERA SENSITIVITY
Five camera sensitivity settings can be selected: Auto, 64,
100, 200, and 400; the numerical values are based on an
ISO equivalent. ISO is the standard used to indicate film
sensitivity: the higher the number, the more sensitive the
film. Camera sensitivity is set in section 3 of the P, A, S, and
M menus (p. 44).
100, 200, and 400; the numerical values are based on an
ISO equivalent. ISO is the standard used to indicate film
sensitivity: the higher the number, the more sensitive the
film. Camera sensitivity is set in section 3 of the P, A, S, and
M menus (p. 44).
Sensitivity
Digital zoom
Color mode
Digital zoom
Color mode
Contrast
Auto
Off
NaturalColor
Normal
Normal
Off
NaturalColor
Normal
Normal
Sharpness
The auto setting automatically adjusts the camera sensitivity to the light conditions
between ISO 64 and 200. When any other setting than auto is used, “ISO” and the set
value will be displayed on the monitor.
between ISO 64 and 200. When any other setting than auto is used, “ISO” and the set
value will be displayed on the monitor.
A specific sensitivity setting can be selected. As the ISO value doubles, the camera
sensitivity doubles. Like grain in silver-halide film that increases with speed, noise
increases with sensitivity in digital imaging; an ISO setting of 64 will have the least noise
and 400 will have the most. An ISO setting of 400 may allow the camera to be hand-
held in low-light conditions without the need of a flash. The affect of noise with
exposures of one second or longer is reduced by the noise-reduction function in section
2 of the setup menu (p. 88).
sensitivity doubles. Like grain in silver-halide film that increases with speed, noise
increases with sensitivity in digital imaging; an ISO setting of 64 will have the least noise
and 400 will have the most. An ISO setting of 400 may allow the camera to be hand-
held in low-light conditions without the need of a flash. The affect of noise with
exposures of one second or longer is reduced by the noise-reduction function in section
2 of the setup menu (p. 88).
ISO setting
Flash range (wide angle)
Flash range (telephoto)
AUTO
0.57 - 5.3m (1.87 - 17.4ft.)
1.57 - 5.3m (5.15 - 17.4ft.)
0.57 - 3.0m (1.87 - 9.84ft.)
1.57 - 3.0m (5.15 - 9.84ft.)
0.57 - 3.8m (1.87 - 12.4ft.)
1.57 - 3.8m (5.15 - 12.4ft.)
0.57 - 5.3m (1.87 - 17.4ft.)
1.57 - 5.3m (5.15 - 17.4ft.)
0.57 - 7.5m (1.87 - 24.6ft.)
1.57 - 7.5m (5.15 - 24.6ft.)
64
100
200
400