Инструкция С Настройками для Konica Minolta Z10
82
A
DVANCED PLAYBACK
VIEWING IMAGES ON A TELEVISION
It is possible to view camera images on your television. The camera has a video-out
terminal to make the connection using the supplied Video cable VC-400. The camera is
compatible with the NTSC and PAL standards. The video-output setting can be checked
and set in section 4 of the setup menu (p. 92).
terminal to make the connection using the supplied Video cable VC-400. The camera is
compatible with the NTSC and PAL standards. The video-output setting can be checked
and set in section 4 of the setup menu (p. 92).
1.Turn off the television and the camera.
2.Insert the small plug of the video cable into the
camera’s video-out terminal. The arrow mark on the
plug should face the back of the camera.
plug should face the back of the camera.
3.Plug the other end of the video cable into the video
input terminal on the television.
4.Turn the television on.
5.Change the television to the video channel.
6.Turn the camera’s mode dial to the playback position
and turn on the camera. The camera’s monitors will
not activate when the camera is attached to a
television. The playback-mode display will be visible
on the television screen.
not activate when the camera is attached to a
television. The playback-mode display will be visible
on the television screen.
7.View images as described in the playback section.
2