Инструкция С Настройками для Konica Minolta Z10
86
S
ETUP MENU
LCD MONITOR BRIGHTNESS
Monitor brightness can be adjusted in 11 levels.
Brightness can be set individually for viewfinder
and direct viewing in the recording mode. Turn
the mode switch to the appropriate position
before opening the brightness option in section 1
of the setup menu (p. 85). Also see page 28.
Brightness can be set individually for viewfinder
and direct viewing in the recording mode. Turn
the mode switch to the appropriate position
before opening the brightness option in section 1
of the setup menu (p. 85). Also see page 28.
Use the left/right keys of the controller to adjust
brightness,
brightness,
the
monitor
image
changes
accordingly. Press the central button of the
controller to set the level.
controller to set the level.
AUTO POWER SAVE
To conserve battery power, the camera will shut down if no operation is made within a
certain period. The length of the auto-power-save period can be changed to 1, 3, 5, or
10 minutes. When the camera is connected to a computer, the auto-power-save period
is fixed at ten minutes. Auto power save is set in section 1 of the setup menu (p. 85).
certain period. The length of the auto-power-save period can be changed to 1, 3, 5, or
10 minutes. When the camera is connected to a computer, the auto-power-save period
is fixed at ten minutes. Auto power save is set in section 1 of the setup menu (p. 85).
An image can be displayed on the monitor after it is
captured. When used with the continuous-advance or
progressive-capture drive modes (p. 47, 48), the images in
the series are played back in a six-frame index display.
Instant playback is activated section 1 of the setup menu (p.
85). A playback period of two or ten seconds can be
selected. To cancel the playback and save the image before
the end of the playback period, press the shutter-release
button partway down.
captured. When used with the continuous-advance or
progressive-capture drive modes (p. 47, 48), the images in
the series are played back in a six-frame index display.
Instant playback is activated section 1 of the setup menu (p.
85). A playback period of two or ten seconds can be
selected. To cancel the playback and save the image before
the end of the playback period, press the shutter-release
button partway down.
INSTANT PLAYBACK
Single still images can be previewed immediately after being captured without instant
playback active. Simply continue to hold the shutter-release button down after taking
playback active. Simply continue to hold the shutter-release button down after taking
the picture to display the image. Release the shutter button to end the playback.
Camera Notes
Set LCD brightness
:adjust
:enter
Low
High