Инструкция С Настройками для Konica Minolta Z10

ATA

TRANSFER MODE

CONNECTING THE CAMERA TO A COMPUTER

Confirm the battery has sufficient power before connecting the camera to a computer;
the full-battery indicator should be displayed on the monitor. The use of the AC adapter
(sold separately) is recommended over the use of the battery. For users with Windows
98 or 98 Second Edition, read the section on page 95 on how to install the necessary
USB driver before connecting the camera to a computer.

1.Start up the computer. The computer must be on before

connecting the camera.

2.Insert the memory card into the camera. To change the

memory card while the camera is connected to a
computer, see page 102.

3.Open the USB port/Video-out terminal cover. Attach the

smaller plug of the USB cable to the camera. The arrow
mark on the plug should face the back of the camera.
Make sure the plug is firmly attached.

4.Attach the other end of the USB cable to the computer’s

USB  port.  Make  sure  the  plug  is  firmly  attached.  The
camera  should  be  connected  directly  to  the  computer’s
USB  port.  Attaching  the  camera  to  a  USB  hub  may
prevent proper operation.

5.Press the main switch to turn on the camera. The USB

connection  is  made  automatically;  a  screen  appears  to
indicate  the  operation.  The  monitor  turns  off  when  the
connection has been made. If the USB connection is not
made,  disconnect  the  camera  and  restart  the  computer.
Repeat the connection procedure above.

Initializing USB connection.