Руководство По Установке для Bizfon 2000
Bizfon Manual I: Installation Guide
Step 2.4: Internet Configuration Wizard
WAN Interface Configuration
If your ISP requires a specific MAC address, (for example, for authentication), it can be en-
tered on this page. The required MAC address can be entered into the User defined field.
If a specific MAC address is not required, leave the default selection This device selected.
tered on this page. The required MAC address can be entered into the User defined field.
If a specific MAC address is not required, leave the default selection This device selected.
Fig. I-22: Internet Configuration Wizard - WAN Interface Configuration page
Use the MTU drop down list to select the maximum packet size on the Ethernet (in bytes).
Click Next to display the DNS Settings page.
Click Next to display the DNS Settings page.
DNS Settings
For DNS, the selection is set to Dynamically by Provider. When using a static IP address,
fixed values must be entered.
fixed values must be entered.
Fig. I-23: Internet Configuration Wizard - DNS Settings page
The Bizfon will suggest the correct settings. If Dynamically by Provider is selected, the
DNS server settings will be set automatically whenever a connection to the Internet is es-
tablished. If Fixed Nameserver Address is selected, manually enter the IP addresses pro-
vided by your ISP for the name server and the alternative name server.
Press Next to display the System Mail Settings.
DNS server settings will be set automatically whenever a connection to the Internet is es-
tablished. If Fixed Nameserver Address is selected, manually enter the IP addresses pro-
vided by your ISP for the name server and the alternative name server.
Press Next to display the System Mail Settings.
Bizfon2000 and Bizfon4000; (SW Version 4.1.x)
27