Инструкции По Установке для Hitachi 7k1000.b
Hitachi Global Storage Technologies
Page 2
version 1.0
the BIOS options of your computer system to
Auto Detection and LBA mode if available.
Once the drive is recognized correctly in the
BIOS, it is ready to be partitioned and
formatted.
Auto Detection and LBA mode if available.
Once the drive is recognized correctly in the
BIOS, it is ready to be partitioned and
formatted.
7. Your operating system setup utility will provide
instructions on how to partition and format your
drive before it installs the operating system.
For additional information see:
drive before it installs the operating system.
For additional information see:
www.hitachigst.com/support
Mounting Recommendations
The drive will operate in all axes (6 directions).
Performance and error rate will stay within
specification limits if the drive is operated in the other
orientations from which it was formatted.
For reliable operation, the drive must be mounted in
the system securely enough to prevent excessive
motion or vibration of the drive during seek operation
or spindle rotation, using appropriate screws or
equivalent mounting hardware.
The recommended mounting screw torque is 0.6 - 1.0
Nm (6-10 Kgf.cm).
Performance and error rate will stay within
specification limits if the drive is operated in the other
orientations from which it was formatted.
For reliable operation, the drive must be mounted in
the system securely enough to prevent excessive
motion or vibration of the drive during seek operation
or spindle rotation, using appropriate screws or
equivalent mounting hardware.
The recommended mounting screw torque is 0.6 - 1.0
Nm (6-10 Kgf.cm).
The recommended mounting screw depth is 4 mm
maximum for bottom and 4.5 mm maximum for
horizontal mounting.
Drive level vibration test and shock test are to be
conducted with the drive mounted to the table using
the bottom four screws.
maximum for bottom and 4.5 mm maximum for
horizontal mounting.
Drive level vibration test and shock test are to be
conducted with the drive mounted to the table using
the bottom four screws.
© 2008 Hitachi Global Storage Technologies
Hitachi Global Storage Technologies
3403 Yerba Buena Road
San Jose, CA 95135
Produced in the United States, 7/08. All rights reserved.
Deskstar™ is a trademark of Hitachi Global Storage Technologies.
Hitachi GST trademarks are authorized for use in countries and jurisdictions in
which Hitachi has the right to use, market and advertise the brands. Hitachi GST
shall not be liable to third parties for unauthorized use of its trademarks.
References in this publication to Hitachi products, programs or services do not
imply that Hitachi intends to make these available in all countries in which it
operates. Some countries have laws that may affect encryption-enabled devices.
Hitachi GST assumes no responsibility for compliance with laws that apply to our
products after they are sold or outside of our control. Accordingly, we suggest
that you review all laws of the countries where you conduct business.
Product specifications provided are sample specifications and do not constitute a
warranty. Information is true as of the date of publication and is subject to
change. Actual specifications for unique part numbers may vary. Please visit the
Support section of our website,
Hitachi Global Storage Technologies
3403 Yerba Buena Road
San Jose, CA 95135
Produced in the United States, 7/08. All rights reserved.
Deskstar™ is a trademark of Hitachi Global Storage Technologies.
Hitachi GST trademarks are authorized for use in countries and jurisdictions in
which Hitachi has the right to use, market and advertise the brands. Hitachi GST
shall not be liable to third parties for unauthorized use of its trademarks.
References in this publication to Hitachi products, programs or services do not
imply that Hitachi intends to make these available in all countries in which it
operates. Some countries have laws that may affect encryption-enabled devices.
Hitachi GST assumes no responsibility for compliance with laws that apply to our
products after they are sold or outside of our control. Accordingly, we suggest
that you review all laws of the countries where you conduct business.
Product specifications provided are sample specifications and do not constitute a
warranty. Information is true as of the date of publication and is subject to
change. Actual specifications for unique part numbers may vary. Please visit the
Support section of our website,
www.hitachigst.com/suport
, for additional
information on product specifications. Photographs may show design models.
9 July 2008
9 July 2008
Side View
(5)
(6)
(7)
Bottom View
(1)
(2)
(3
)
(4
)
I/F Connector
(4X) Max. penetration 4.0 mm
(6X) Max. penetration 4.5 mm
Thread
(1) (2) (3) (4) (5) (6) (7)
6-32UNC 41.28±0.5
44.45±0.2
95.25±0.2
6.35±0.2 28.5±0.5 60.0±0.2 41.6±0.2
Figure 1: Mounting holes locations (all dimensions are in mm)
Figure 2: Connector location (all dimensions are in mm)