Руководство Пользователя для Clavia lead 3
7. Panel reference: Oscillator 1 & 2
NORD LEAD 3 V1.2x
Page 62
When sync is applied, the basic pitch of the Oscillator is locked to that of the sync-oscillator. If you
change the pitch of the sync-oscillator you will affect the basic pitch of both oscillators. Furthermore,
when you vary the pitch of the synchronized Oscillator, this will be perceived as a change in timbre, rather
than in pitch. This leads to a signal with a frequency spectrum with deep resonance in the Oscillator’s
harmonics.
change the pitch of the sync-oscillator you will affect the basic pitch of both oscillators. Furthermore,
when you vary the pitch of the synchronized Oscillator, this will be perceived as a change in timbre, rather
than in pitch. This leads to a signal with a frequency spectrum with deep resonance in the Oscillator’s
harmonics.
Hold down S
HIFT
and press the W
AVEFORM
S
ELECTOR
button to sync the wave. Oscillator Sync can be
used with all waveforms except in Dual Sine mode. In sync mode the “hidden” sync oscillator is activated
and controls the main pitch of the signal. In sync mode the S
and controls the main pitch of the signal. In sync mode the S
HAPE
knob controls the synched oscillator’s
pitch. As you change the Shape value you get drastic changes in timbre - the typical “synched sound”.
Tip! When using Oscillator Sync, it can be very useful to have the Shape amount(s) modulated from any
of the LFOs in Nord Lead 3. This will generate a signal with continuously varied harmonic content.
of the LFOs in Nord Lead 3. This will generate a signal with continuously varied harmonic content.
Example 2: a square wave synched by a sync oscillator. The square wave is restarted every time the sync oscil-
lator begins a new cycle. The resulting signal gets deep resonance in its harmonics.
lator begins a new cycle. The resulting signal gets deep resonance in its harmonics.