Руководство Пользователя для Alphasmart dana

Connecting NEOs to Your Computer

. . . . .

2. A message may appear, saying that the driver is not certified for Windows 

XP. This is expected. Click Continue Anyway.

3. Click Finish. If a message asks if you want to restart the computer, click 

Yes or No.

4. In AlphaSmart Manager, check the connection status area at the bottom 

of the window to make sure your NEO, or your AlphaHub and NEOs, are 
connected.

If your NEOs don’t appear to be connected in AlphaSmart Manager even 
though you know you connected them properly, it could be because you 
cancelled the Hardware Wizard or because the drivers weren’t installed 
properly. (Note: If the drivers weren’t installed properly, it may be because 
you don’t have sufficient privileges/permissions on the computer.) To fix this 
problem, disconnect the USB cable from your computer. Make sure 
AlphaSmart Manager is running; then, reconnect the cable to a different USB 
port. The Hardware Wizard should reappear. Follow the steps above again 
and recheck the connection status.

The bottom of the AlphaSmart Manager window shows you how many NEO 1 
or NEO 2 laptops (AlphaSmart Devices) are connected 

. In the example 

below, just one NEO is connected via a USB cable, but you may have several 
connected in a SmartOption Mobile Lab.

To view the status of the connection for each NEO, click the plus sign 
(Windows) or  (Macintosh) at the bottom of the screen 

. You might need 

to wait a few moments before the connection status information appears.