Инструкция для Canon iPF6400

To print over an AppleTalk network, activate the AppleTalk protocol and configure the destination as follows.

Activating AppleTalk on the printer

Important

By default, the AppleTalk protocol is disabled on the printer.

 

On the Tab Selection screen of the Control Panel, press 

◀ or ▶ to se-

lect the Settings/Adj. tab (

).

Note

If the Tab Selection screen is not displayed, press the Menu button.

Press the OK button.
The Set./Adj. Menu is displayed.

Press ▲ or ▼ to select Interface Setup, and then press the OK button.

Press ▲ or ▼ to select AppleTalk, and then press the OK button.

Press ▲ or ▼ to select On, and then press the OK button.

 

Press the Menu button.
If you have changed any settings, a confirmation message is
displayed. In this case, press the OK button.

Important

Be sure to complete step 6. This will activate the values you have entered.

Note

By using RemoteUI, you can also specify the object name used for AppleTalk, as well as the printer zone name.
For details on RemoteUI, 

Configuring the Destination (Mac OS X)

Important

AppleTalk is supported in Mac OS X 10.2.8–10.4.

 

 

iPF6400

                                                                                                                                      

Configuring the Destination for AppleTalk Networks (Mac OS X)

                                                                                                                                                                                                                                         

Network Setting

Mac OS X Settings

697