Инструкция для Canon iPF9400

Using the back of the Cleaning Brush, move the Switch to the side opposite ●, corresponding to the size of the
paper for printing.
In this case, note that you will move the switch in the opposite direction from the direction in step 4.

Note

The Switch only moves number 1 and the number that
matches the paper size. Set all of the switches where the
number does not match the paper size in switches number
2 and higher to the ● side.

 

 

Close the Top Cover.

Cause

Corrective Action

The paper feed amount is out of adjustment.

Adjust the feed amount.

The type of paper specified in the printer driver
does not match the type loaded in the printer.

Load paper of the same type as you have specified in the printer driver.

Make sure the same type of paper is specified in the printer driver as you have loaded in
the printer.

Press the Stop button and stop printing.

Change the type of paper in the printer driver and try printing again.

Cause

Corrective Action

In the Control Panel menu, Adj. Priority is set to
Print Quality.

Set Adj. Priority to Print Length in the Control Panel menu, and then execute Adjust
Length.

The type of paper specified in the printer driver
does not match the type loaded in the printer.

Load paper of the same type as you have specified in the printer driver.

Make sure the same type of paper is specified in the printer driver as you have loaded in
the printer.

 

The contrast becomes uneven during printing

                                                                                                                                                                    

iPF9400

                                                                                                                                                                                                                                       

Troubleshooting

Problems with the printing quality

 

896