Инструкция С Настройками для Canon 10
44
E
Using the Full
Range of Features
To prevent interference from other
Canon wireless controllers being used
nearby, there are 2 remote sensor
modes and an off setting. The wireless
controller and the camera have to be set
to the same mode in order to be
compatible.
Canon wireless controllers being used
nearby, there are 2 remote sensor
modes and an off setting. The wireless
controller and the camera have to be set
to the same mode in order to be
compatible.
When Operating 2 Canon DV Camcorders (Remote Sensor Mode)
To turn the remote sensor off:
Open the menu and select SYSTEM. Then select WL.REMOTE, set it to OFF
Open the menu and select SYSTEM. Then select WL.REMOTE, set it to OFF
B and close the menu.
•
B appears in the display.
To change the mode...
...on the camera:
Open the menu and select SYSTEM. Then select WL.REMOTE, set it to
...on the camera:
Open the menu and select SYSTEM. Then select WL.REMOTE, set it to
A 1 or A 2 and close the menu.
• The selected mode will appear on the display for 4 seconds.
...on the wireless controller:
Press and hold the REMOTE SET button on the wireless controller.
Simultaneously press the ZOOM W button for mode 1 or the ZOOM
T button for mode 2. Continue to press simultaneously for over 2
seconds.
T button for mode 2. Continue to press simultaneously for over 2
seconds.
• Be sure to set the wireless controller to the same mode as the camera.
A 1
: Mode 1
A 2
: Mode 2
OFF
B : Sensor off
WL.REMOTE••• 1
SYSTEM
(
35)
The wireless controller and the camera have been preset to mode 1. If you change
the mode on the camera, be sure to change the mode on the wireless controller to
the same mode.
the mode on the camera, be sure to change the mode on the wireless controller to
the same mode.
REMOTE
ZOOM
W
T
SET
CARD
R E C
R E C
CARD
PLAY
PLAY
MOVIE
P.SCAN
VCR