Справочник Пользователя для Canon 100

112

The tape stops during 
playback pause.

When playback pause continues for more than 4 minutes 30 
seconds during playback or audio dubbing, the camcorder 
shuts off to protect the tape and video heads. When audio 
dubbing, restart the playback of the tape and press the PAUSE 

 button on the wireless controller.

–

Memory card cannot be 
inserted.

Memory card was not facing the correct direction. Turn the 
memory card over and reinsert it.

20

Memory card cannot be 
recorded.

Insert a memory card.

20

Memory card is full. Replace the memory card or erase 
images.

83

Memory card is not initialized. Initialize the memory card.

85

The folder and file numbers have reached their maximum 
value. Set [FILE NOS.] to [RESET] and insert a new memory 
card.

68

If you are using an SD memory card, make sure the card 
protection tab is set to allow recording.

–

Memory card cannot be 
played back.

Set the 

 switch to PLAY and the TAPE/CARD switch to 

.

40

Insert a memory card.

20

Image cannot be erased.

Image is protected. Cancel the protection.

84

“

” flashes red.

Card error occurred. Turn off the camcorder. Remove and 
reinsert the memory card. Initialize the memory card if flashing 
persists.

85

The printer is not operating 
even though camcorder and 
printer are correctly 
connected.

1. Set the 

 switch to PLAY and the TAPE/CARD switch 

to .

2. Disconnect and reconnect the USB cable.
3. Turn off the printer and turn it back on.

–

Dubbing via the camcorder’s 
DV terminal does not work.

Set [AV

DV] to [OFF].

93

Wrong signal standard. Dubbing may work via the AV terminal.
Refer also to the instruction manual of the connected device.

–