Справочник Пользователя для Canon 100
92
Converting Analog Signals into Digital
Signals (Analog-Digital Converter)
Signals (Analog-Digital Converter)
By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analog
video/audio signals to digital signals and output the digital signals via the DV terminal.
The DV terminal serves as output terminal only.
video/audio signals to digital signals and output the digital signals via the DV terminal.
The DV terminal serves as output terminal only.
Connecting the Devices
Turn off all devices before starting the connections. Unload the tape from the camcorder.
Check the type and orientation of the DV terminal and make sure you connect the DV
cable properly. Refer also to the instruction manual of the connected device.
cable properly. Refer also to the instruction manual of the connected device.
VIDEO
AUDIO
R
L
Signal flow
Commercially available DV cable
Signal flow
STV-250N Stereo
Video Cable (supplied)
Video Cable (supplied)
Digital video device
Open the terminal cover
INPUT
Open the LCD panel