Справочник Пользователя для Canon 10

105

You can record still images with the

camcorder, from a tape in the camcorder

(

108) or from devices connected via the

DV terminal or AV terminal (

109).

❍ Do not turn off the camcorder, disconnect the power source or remove the

memory card while the card access display (<<< or >>>) in the upper right
corner of the screen or the card access indicator is flashing. Doing so could
result in data damage.

❍ When you are using a SD Memory Card, make sure that the protect switch is

set to allow recording.

Make sure to insert a memory card with enough remaining capacity.

In autofocus mode, the camcorder keeps focusing automatically. Furthermore, this
camcorder is equipped with the Focus-Priority mode for even more accurate focus. In
Focus-Priority mode, you can choose between three focusing points (

106).

However, you can turn off the Focus-Priority mode if you wish to put timing ahead of
focusing (

107). 

When the program selector is set to 

[, the Focus-Priority mode is set to ON (only the

center focusing point available).

A white focusing frame appears in the center of the screen. The camcorder will focus on

the subject in the center of the screen. To change the focusing point, see Selecting a

Focusing Point (

106).

•

F and focusing frame turn green when focus is adjusted. The
beep sounds twice. The picture may appear out of focus for a
moment while the camcorder is focusing. 

• Exposure is locked.
• Focus can be adjusted manually with the focus ring when the PHOTO button is pressed

halfway.

• When you press the PHOTO button on the wireless controller, recording starts immediately.

Card access 
indicator

PHOTO button