Инструкции По Установке для Canon I455

Carefully remove all items from the box.

i455 Series

Desktop Photo Printer

Documentation  

and Software Kit

Power Cord

i455 Series Print Head

Paper Rest

Ink Tanks

BCI-24 Black                      BCI-24 Color

Open the output tray, then open the front  
cover. The print head holder automatically  
moves to the center.

Press the Power button. The printer will  
initialize.

Plug the power cord into the back of the  
printer and connect the other end to a  
power outlet.

Remove all shipping tape from the front 
and back of the printer. 

Write down the serial number located to  
the right of the print head holder. You will  
need this later to register the product.

Power

Lamp

Power

Button

Serial Number

Output Tray

Front Cover

Shipping
Tape

Paper Rest

Output Tray

Remove the black ink tank (BCI-24 Black) 
from its package and pull off the orange  
protective cap.

NOTE: Avoid ink at the bottom of the tank.

Insert the black ink tank into the slot on  
the right, then push in until the ink tank  
clicks into place.

Close the front cover, attach the paper rest  
and pull out the output tray.

Protective Cap

Click

Repeat the procedure for the color ink  
tank (BCI-24 Color), inserting it into the  
remaining slot.

NOTE: The printer will perform a print  
head cleaning after the cover is closed.

Paper
Guide

USB Cable

USB Port

IMPORTANT: Be sure the printer  
is off before continuing, or the  
computer will attempt to install  
the printer driver before the  
printer is ready.

IMPORTANT: For correct printer  
operation, make sure ink tanks  
are secure in slots.

Connect one end of a USB cable to  
the computer, the other to the printer.

Pinch the paper guide and slide it to the  
left. Load a sheet of blank paper in the  
paper rest. Slide the guide toward the  
left edge of the paper.

Turn the printer off.

Click

Remove the print head from its package.

NOTE: Do not touch the electrical contacts 
or the print head nozzles.

Raise the gray lock lever on the printer.

Slide the print head into the holder until  
it is securely seated.

Do not press it down.

Lower the lever until it clicks into place.

Remove the orange protective cap. 

Electrical

Contacts

Tear at notch to open

Print Head  

Nozzles

1

2

3

4

5

1

5

4

3

1

2

1

2

3

4

1

2

3