Инструкции По Установке для Canon i560

Parallel Port

Secure

Wire Clips

Parallel Cable

TURN THE PRINTER OFF.

Connect one end of the parallel cable to 
the computer, the other to the printer.

1

2

Pinch the paper guide and slide it to the  
left. Load a sheet of blank paper in the  
paper rest. Slide the guide toward the  
left edge of the paper.

3

USB Port

USB Cable

Insert the ink tank into the correct slot.  
(Refer to the color guide on the print head holder).

Press down until the ink tank clicks into place.

click

TURN THE PRINTER OFF.

Connect one end of the USB cable 
to the computer, the other to the printer.

IMPORTANT: Be sure the printer is  
off before continuing, or the computer  
will attempt to install the printer  
driver before the printer is ready.

IMPORTANT: For correct printer  
operation, make sure the ink tanks 
are secure in slots.

click

Output Tray

Paper Rest

Paper
Guide

Slide the print head into the holder.  
The print head will rest at a slight angle.

Remove the print head from its package.

Remove the orange protective cap 
from the print head nozzles. 

NOTE: Do not touch the print head  
nozzles or electrical contacts.

Lower the lock lever and press it down  
until it clicks into place.

Raise the lock lever on the printer.

Print Head Nozzles

Electrical Contacts

Tear at notch to open

Plug the power cord into the back of the  
printer and connect the other end to a  
power outlet.

Open the front cover. The print head holder
automatically moves to the center. Remove  
the protective tape.

Write down the serial number located to 
the right of the print head holder. You will  
need this later to register the product.

Shipping Tape

POWER

Lamp

POWER

Button

Serial Number

 Protective Tape

Press the POWER button.

Remove the shipping tape from the  
front and back of the printer. 

Ink Tanks

          BCI-6C Cyan            BCI-6M Magenta

BCI-3eBK Black                                                  BCI-6Y Yellow

Power Cord

i 560 Series Print Head

i 560 Series

Desktop Photo Printer

Carefully remove all items from the box.

Documentation  

and Software Kit

Peel back the orange tab and completely  
remove the plastic wrapper from the Yellow  
Ink Tank (BCI-6Y). 

Twist off and discard the orange  
protective cap.

NOTE: Avoid ink at the bottom of the tank.

NOTE: The printer will perform a print 
head cleaning once the cover is closed.

Insert the remaining ink tanks into 
their assigned slots.

Close the front cover and extend the  
paper rest and paper output tray.

Protective Cap

1

2

3

4

5

1

5

4

3

1

2

1

2

3

4

5

1

2