Инструкции По Установке для Canon i900d

Pinch the paper guide and slide it to the 
left. Load a sheet of blank paper in the 
paper rest. Slide the guide toward the  
left edge of the paper. 

3

Paper Guide

USB Port

USB Cable

Insert the ink tank into the correct slot.  
(Refer to the color guide on the print head holder.)

Press down until the ink tank clicks into place.

click

Paper Output Tray

Paper Rest

NOTE: The printer will perform a print  
head cleaning after the cover is closed.

TURN THE PRINTER OFF.

Connect one end of the USB cable to the  
computer, the other to the printer.

IMPORTANT: Be sure the printer is  
off before continuing, or the computer  
will attempt to install the printer  
driver before the printer is ready.

Electrical Contacts

Print Head Nozzles

click

Tilt the print head toward you as you  
lower it into the holder.

Remove the print head from its package.

Remove the orange protective cap 
from the print head nozzles. 

NOTE: Do not touch the electrical contacts  
or the print head nozzles.

Lower the lock lever and press it down  
until it clicks into place.

Raise the lock lever on the printer.

Tear at notch to open

POWER

Lamp

POWER

Button

Plug the power cord into the back of the  
printer and connect the other end to a  
power outlet.

Open the front cover. The print head holder
automatically moves to the left. Remove  
the protective tape.

Write down the serial number located to 
the left of the print head holder. You will  
need this later to register the product.

Shipping Tape

Serial Number

 Protective Tape

Press the POWER button. The printer  
will initialize.

Remove the shipping tape from the printer. 

i 900D Series

Photo Printer

Carefully remove all items from the box.

Documentation  

and Software Kit

Photo Paper Tray

Peel back the orange tab and completely  
remove the plastic wrapper from the Magenta  
Ink Tank (BCI-6M). 

Twist off and discard the orange  
protective cap.

NOTE: To avoid spilling ink, never  
press on the sides of an ink tank.

Insert the remaining ink tanks into their  
assigned slots, pressing down until they click.

Close the front cover and extend the  
paper rest and paper output tray.

Protective Cap

Power Cord

i 900D Series Print Head

Ink Tanks

      BCI-6Y Yellow               BCI-6M Magenta

BCI-6BK Black                                                          BCI-6C Cyan

      BCI-6PM Photo Magenta               BCI-6PC Photo Cyan

1

2

3

4

5

1

5

4

3

1

2

1

2

3

4

5

1

2