Краткое Руководство По Установке для Canon i950
Easy Setup Instructions
Start Here
i950
Series Photo Printer
USB Port
USB Cable
Continue with Step 6
on side two.
on side two.
Turn the printer off.
Connect one end of the USB cable
to the computer, the other to the printer.
to the computer, the other to the printer.
IMPORTANT: Be sure the printer is
off before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
off before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
Connect the Printer
To Your Computer
5
Close the front cover and extend the paper
rest and paper output tray.
rest and paper output tray.
Insert the remaining five ink tanks into
their assigned slots.
their assigned slots.
Insert the ink tank into the correct slot.
(Refer to the color guide on the print
head holder.)
(Refer to the color guide on the print
head holder.)
Press down gently until the ink tank
locks into place.
locks into place.
Twist off and discard the orange
protective cap.
protective cap.
NOTE: To avoid spilling ink, never press on
the sides of an ink tank.
the sides of an ink tank.
Protective cap
Install the Ink Tanks
4
Pull the orange tab off the magenta ink tank
(BCI-6M), then remove and discard the
plastic wrapper.
(BCI-6M), then remove and discard the
plastic wrapper.
Gently slide the print head into the holder.
The print head will rest at a slight angle.
The print head will rest at a slight angle.
Do not press it down.
Remove the print head from its package.
Turn the print head over, then remove
the orange protective cap.
the orange protective cap.
NOTE: Do not touch the electrical contacts.
Lower the lock lever and gently press
it down until it locks into place.
it down until it locks into place.
Raise the gray lock lever.
Electrical contacts
Print head nozzles
3
Install the Print Head
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
printer and connect the other end to a
power outlet.
Open the front cover. The print head holder
automatically moves to the center. Remove
the protective tape.
automatically moves to the center. Remove
the protective tape.
Write down the serial number located to
the right of the print head. You will need
this later to register the product.
the right of the print head. You will need
this later to register the product.
2
Prepare the Printer
Remove the shipping tape from the
front and sides of the printer.
front and sides of the printer.
Shipping Tape
Press the POWER button.
POWER
Lamp
POWER
Button
Serial number
Protective tape
Unpack the Printer
1
Carefully remove all items from the box.
i950
Series Photo Printer
Documentation
and Software Kit
Ink Tanks
BCI-6C Cyan
BCI-6M Magenta
BCI-6BK Black
BCI-6Y Yellow
BCI-6PC Photo Cyan
BCI-6PM Photo Magenta
Power Cord
i950
Series Print Head
1
2
3
4
1
5
4
3
1
2
1
2
3
4
5
1
2