Справочное Руководство для LXE 1280
148
Expanded Functions
LDS Plus Reference Guide
E-SW-LDSPLUSRG-G
B: DOS Terminal-Generated Sequence Numbers
Expanded Function B is a message that causes the DOS terminal to generate sequence numbers
for inbound messages.
for inbound messages.
Expanded Function B sets the LDS Plus parameter AutoSeqNumbers to Yes. When this parameter
is set to yes, the DOS terminal generates sequence numbers for all inbound messages. Refer to the
specific parameter information in Chapter 3, “Configuration Utility.”
is set to yes, the DOS terminal generates sequence numbers for all inbound messages. Refer to the
specific parameter information in Chapter 3, “Configuration Utility.”
What Happens
See “Sequence Number (SEQ #)” in Chapter 4, “Messages”, for explanation of Receive and
Transmit sequence numbers.
Transmit sequence numbers.
NMWS Parameter Equivalent
When you set LDS Plus TE terminal parameters remotely from the NMWS, the pertinent NMWS
parameters for this option are:
parameters for this option are:
Automatic Sequence Numbers (ASN). Refer to Chapter 1, “Introduction”, section
titled “LXE 6200 Backbone Compatibility”.
titled “LXE 6200 Backbone Compatibility”.
Attributes
No beeps
No change in automatic transmit buffer length
No change in automatic transmit buffer length
Example
Y
is the control character that is used
when sending an expanded function.
B
is the N/EF character that sets the
AutoSeqNumbers parameter to yes.
<02S
Y
B
C
R
L
F
Figure 5-2 Expanded Function B Forced Message
See Also
See Expanded Function “D : Turn Off Sequence Numbers.”