Руководство Пользователя для LXE mx3
2
Introduction
Integrated Scanner Programming Guide
E-SW-SCANNERPG-L
Tethered Scanners
This guide does not include the programming barcodes used for LXE approved tethered scanners
connected to a COM port on LXE mobile devices and docking cradles. It does not include
programming barcodes for LXE approved Bluetooth scanners. Please refer to the barcode reader
manufacturer’s User Guide.
connected to a COM port on LXE mobile devices and docking cradles. It does not include
programming barcodes for LXE approved Bluetooth scanners. Please refer to the barcode reader
manufacturer’s User Guide.
Full programming guides for the scan engines in tethered scanners and Bluetooth barcode readers
may be available on the manufacturer’s web site.
may be available on the manufacturer’s web site.
Identify Your Barcode Reader Type
LXE offers two types of barcode reader engines: laser scanners and laser imagers. For the purposes of
this manual, both terms are interchangeable. It is good practice to avoid looking into the beam emitted
by the apertures.
this manual, both terms are interchangeable. It is good practice to avoid looking into the beam emitted
by the apertures.
There is only one integrated (built-in) barcode reader engine in the LXE mobile device at a time.
Different scanner engines may be purchased from LXE. Contact your LXE representative for
assistance.
Different scanner engines may be purchased from LXE. Contact your LXE representative for
assistance.
Look on the label on the back of your LXE mobile device. The type of installed scan engine may be
identified on the LXE label.
identified on the LXE label.
Make sure the Scan button cannot be pressed when you are looking at the scanner aperture!
Figure 1-1 Identify Scan Engine using Scanner / Imager Apertures
1
Imager – Illumination LEDs
2 Beam
Aperture
3
Imager – Clear Glass Lens
4
Laser Scanner – Red Glass Lens
Handheld devices without an integrated barcode reader usually have an opaque scan aperture lens
protecting the device’s internal components.
protecting the device’s internal components.