Руководство Пользователя для LXE mx3
5380SF 2D Imager - Imager Parameters – Symbology Specific
247
E-SW-SCANNERPG-L
Integrated Scanner Programming Guide
Interleaved 2 of 5
Parameter Default Values:
Interleaved 2 of 5
On
Check Digit
No Check Digit
Message Length
Minimum 4 / Maximum 80
Scan the Save barcode when you have finished setting each desired value.
Interleaved 2 of 5 Off
Interleaved 2 of 5 On
Default all Interleaved 2 of 5 settings
Check Digit
Parameter Default Value: No Check Digit
No CheckDigit
No Check Digit indicates that the imager reads and transmits barcode data with or without a check
digit.
digit.
Validate and Transmit
Validate but don’t Transmit
Validate and Transmit -- the imager will only read Interleaved 2 of 5 barcodes printed with a check
digit, and will transmit this digit at the end of the scanned data.
digit, and will transmit this digit at the end of the scanned data.
Validate, but Don’t Transmit - the imager will only read Interleaved 2 of 5 barcodes printed with a
check digit, but will not transmit the check digit with the scanned data.
check digit, but will not transmit the check digit with the scanned data.