Руководство Пользователя для LXE mx3
5380SF 2D Imager - Imager Parameters – Symbology Specific
267
E-SW-SCANNERPG-L
Integrated Scanner Programming Guide
UPC-E0 Addenda
Parameter Default Value:
2 Digit Addenda Off / 5 Digit Addenda Off
2 Digit Addenda Off
2 Digit Addenda On
Scan the On barcode to enable the addition of 2 digits to the end of all scanned UPC-E data.
Scan the Save barcode when you have finished setting the desired value.
5 Digit Addenda Off
5 Digit Addenda On
Scan the On barcode to enable the addition of 5 digits to the end of all scanned UPC-E data.
Scan the Save barcode when you have finished setting the desired value.
See Also:
UPC-E0 Addenda Required, UPC-E0 Addenda Separator
UPC-E0 Addenda Required
Parameter Default Value:
Not Required
Addenda Not Required
Addenda Required
Scan the Addenda Required barcode to enable the imager to read only UPC-E barcodes that have
addenda. Scan the Save barcode.
addenda. Scan the Save barcode.
Next enable a 2 or 5 digit addenda using a programming barcode in the section titled “UPC-E0
Addenda”.
Addenda”.
Scan the Save barcode when you have finished setting the desired value.
See Also:
UPC-E0 Addenda, UPC-E0 Addenda Separator