Руководство Пользователя для LXE mx3
5380SF 2D Imager - Imager Parameters – Symbology Specific
271
E-SW-SCANNERPG-L
Integrated Scanner Programming Guide
EAN / JAN-13 Addenda Required
Parameter Default Value:
Not Required
Addenda Not Required
Addenda Required
Scan the Addenda Required barcode to enable the imager to read only EAN/JAN-13 barcodes that
have addenda. Scan the Save barcode.
have addenda. Scan the Save barcode.
Next enable a 2 or 5 digit addenda using a programming barcode in the section titled “EAN/JAN-13
Addenda”.
Addenda”.
Scan the Save barcode when you have finished setting the desired value.
See Also:
EAN/JAN-13 Addenda, EAN/JAN-13 Addenda Separator
EAN / JAN-13 Addenda Separator
Parameter Default Value:
On
Off
On
Scan the Off barcode to disable the imager adding a space between the scanned data from the barcode
and the data from the addenda.
and the data from the addenda.
Scan the Save barcode when you have finished setting the desired value.
See Also:
EAN/JAN-13 Addenda, EAN/JAN-13 Addenda Required
EAN / JAN-13 Check Digit
Parameter Default Value:
On
Off
On
Scan the Off barcode to disable transmission of the check digit at the end of the scanned data.
Scan the Save barcode when you have finished setting the desired value.