Руководство Пользователя для LXE mx3
5380SF 2D Imager - Imager Parameters – Symbology Specific
275
E-SW-SCANNERPG-L
Integrated Scanner Programming Guide
MSI
Parameter Default Values:
MSI
Off
Check Character
Validate Type 10, but Don’t Transmit
Message Length
Minimum: 4 / Maximum: 48
Scan the Save barcode when you have finished setting the desired value.
MSI Off
MSI On
Default all MSI settings
MSI Check Character
Parameter Default Value:
Validate Type 10, but Don’t Transmit
Validate Type 10, but Don’t Transmit
Validate Type 10 and Transmit
Validate and Transmit -- the imager will only read MSI barcodes printed with the specified type
check character, and will transmit the check character at the end of the scanned data.
check character, and will transmit the check character at the end of the scanned data.
Validate, but Don’t Transmit - the imager will only read MSI barcodes printed with the specified
type check character, but will not transmit the check character with the scanned data.
type check character, but will not transmit the check character with the scanned data.
Scan the Save barcode when you have finished setting the desired value.