Руководство Пользователя для LXE mx3
16
Symbol Barcodes
Integrated Scanner Programming Guide
E-SW-SCANNERPG-L
Pre-Configured Default Values
Note: The SE955 scanner replaced the SE824 scanner on all MX7’s manufactured after July 2006. It also
replaced the SE923 scanner on all MX3X and MX3-RFID devices manufactured after July 2006.
Mobile Device
SE824 SE923
SE955 SE1223 SE1224 SE1524 SE2223
MX3X and MX3Plus
x
x
MX3-RFID (laser)
x
x
MX5X
x x x
MX7
x
x x
MX8
x
Figure 2-2 Pre-configured Default Values – Symbol Scan Engines
All MX3 Mobile Devices – SE923, SE955
All MX3s - Scanner Parameter
Default Value for SE923
Default Value for SE955
Set Default Parameter
All Defaults
All Defaults
Scanning Options
Aim Duration
0.0 sec
0.0 sec
Aiming Mode
Not Supported
Not Supported
Beeper Volume
Not Supported
Not Supported
Bi-directional Redundancy
Disable Disable
Laser On Time
3.0 sec
3.0 sec.
Linear Code Type Security Levels
1 1
Parameter Scanning
Enable Enable
Power Mode
Low Power
Low Power
Raster Expansion Rate
Not Supported
Not Supported
Raster Height
Not Supported
Not Supported
Scan Angle (Clipping)
No Clipping
Not Supported
Scan Angle
Normal Wide
Scanning Mode
Not Supported
Not Supported
Time Delay to Low Power
Not Supported
Not Supported
Time-out Between Different Symbols
Not Supported
Not Supported
Time-out Between Same Symbol
1.0 sec
1.0 sec.
Transmit “No Read” Message
Disable Disable
Trigger Mode
Level Level