Руководство Пользователя для LXE mx3

Symbol Barcodes - Scanner Parameters – SE Barcode Type Specific 

83 

E-SW-SCANNERPG-L 

 

Integrated Scanner Programming Guide 

This option decodes only those codes containing two selected lengths. For example, when you want 
to scan only Codabar symbols containing 2 or 14 characters, scan the “Codabar Two Discrete 
Lengths” barcode and then “0”, “2”, “1” and “4” barcodes using the “Keypad Number Symbols” at 
the end of this chapter. 

To begin setting two discrete lengths, scan this barcode: 

Codabar - Two Discrete Lengths

 

Next, scan four numeric barcodes that correspond to the desired value. Single digit numbers must 
have a leading zero. If you wish to change your number selection, scan Cancel on the “Keypad 
Number Symbols” page. 

 

This option decodes a code type within a specified minimum and maximum range. For example, 
when you want to scan only Codabar symbols containing between 4 and 12 characters, scan the 
“Codabar Length Within Range” barcode and then “0”, “4”, “1” and “2” barcodes. 

To begin setting lengths within a range, scan this barcode: 

Codabar - Length within Range

 

Next, scan numeric barcodes that correspond to the desired value using the “Keypad Number 
Symbols” at the end of this chapter. Single digit numbers must have a leading zero. If you wish to 
change your number selection, scan Cancel on the “Keypad Number Symbols” page. 

 

This option decodes Codabar barcodes containing any number of characters. 

To set any length, scan this barcode: 

Codabar - Any Length