Руководство Пользователя для LXE mx6
Power Key
11
E-EQ-MX6OGWW-E
MX6 User’s Guide
Reset or Reboot
CAUTION
LXE recommends that you always attempt a Soft reset before initiating a Hard
reset. Once you initiate a hard reset, all applications are forcibly closed and
working RAM and files are cleared. It is a good idea to store important data in
the MX6’s Flash memory for this reason.
reset. Once you initiate a hard reset, all applications are forcibly closed and
working RAM and files are cleared. It is a good idea to store important data in
the MX6’s Flash memory for this reason.
Soft Reset
A warm reset (sometimes called warm boot) closes all applications, clears the working RAM, and
preserves the file system.
preserves the file system.
To initialize a soft reset press and hold the Control <CTRL> and Shift <SFT> keys for
approximately 10 seconds.
approximately 10 seconds.
Release the keys and the MX6 resets. The red and green LEDs blink for approximately three
seconds.
seconds.
After a Soft Reset
The Today or Start screen appears. The custom settings in the registry are persistent. An installed
RF Network PC Card connects to the network system.
RF Network PC Card connects to the network system.
Hard Reset
A hard reset (sometimes called cold boot) is a complete reset in which all applications are
forcibly closed and working RAM and unsaved data and files in flash memory are cleared.
forcibly closed and working RAM and unsaved data and files in flash memory are cleared.
To perform a hard reset, press and hold the Control <CTRL> key and the Escape <ESC> key
for approximately 3 seconds.
for approximately 3 seconds.
Note: The Start Menu will repeatedly appear and disappear and the keys will click repeatedly.
This is intended to alert the user that a drastic action is about to occur.
The red and green LEDs blink for approximately three seconds.
When the MX6 reboots, it will need to be configured once again. See the section titled Quick
Start.
Start.
Caution:
A hard reset erases all the data stored in RAM memory and all applications
installed in RAM.
installed in RAM.
See the section titled The IPSM Folder in the MX6 Reference Guide for a list of files that are
saved over a hard reset. LXE recommends storing downloaded files in the IPSM folder, if desired.
saved over a hard reset. LXE recommends storing downloaded files in the IPSM folder, if desired.