Руководство Пользователя для LXE mx3

Communication Overview 

11 

E-SW-WAVACFG-A 

LXE Computers and Wavelink Avalanche User’s Guide 

The default is to install in the C:\Program Files directory.  If a different directory 
was used during Avalanche installation, please substitute the appropriate directory in 
place of C:\Program Files. 

2.  Open the Avalanche.properties file using the text editor, preferably Microsoft Word 

Pad. 

3.  Find the line listing the COM port, such as: 

COM2=BAUD\:38400\ DATABITS\:8\ PARITY\:NONE\ FLOW\:\ DELAY\:75

 

Note that there is one line for each COM port detected.  Select the appropriate line 
for the COM port you wish to configure. 

4.  Modify the line for desired COM port as necessary: 

BAUD 

Valid Options:  300, 600, 1200, 2400, 4800, 9600, 

19200, 38400, 57600, 115000, 128000 

Default: 38400 

DATABITS 

Valid Options:  5, 6, 7, 8 

Default: 8 

PARITY 

Valid Options:  NONE, EVEN, ODD, MARK, SPACE 

Default: NONE 

FLOW 

Valid Options:  [null space], RTS/CTS, XON/XOFF 

Default: 

[null space] (no flow control) 

DELAY 

Valid Options:  0 – 250 milliseconds 

Default: 75 

milliseconds 

Generally, it is only necessary to modify the baud rate to correspond with the 
docking cradle being used.  In most cases this is 9600 bps. 

5.  Save the file after your changes have been made. 

The Avalanche Service must be restarted in one of the following ways: 

1.  The service can be restarted manually by following the same procedure as detailed in 

“Step 2: Stop the Avalanche Service”.  However, instead of selecting “Stop” from 
the menu, select “Start”. 

2.  The service can also be restarted by connecting to the Agent from the Management 

Console. 

Do not restart the Agent until you are finished modifying the Avalanche.properties file.