Руководство Пользователя для LXE vx7

Install Mounting Brackets 

51 

E-EQ-VX7OGWW-H 

VX7 User’s Guide 

LXE offers a replaceable touchscreen protective film to protect the touchscreen when the VX7 is 
used in an abrasive environment. 

1.  Make sure both the touchscreen and protective film are clean and dry before installation.  

Please review “Cleaning the Display”, later in this guide, for instructions on suitable cleaning 
agents. 

 

2.  Center the protective film over the touchscreen.  The antiglare side must be facing outward.  

Do not cut or trim the protective film. 

3.  The protective film is approximately 1/10” (2.54cm) larger than the touchscreen at the centers 

of the edged (indicated by the arrows in the figure above). 

4.  Slide the protective film so that one of the edges of the film can be slid between the 

touchscreen and display housing when the protective film is re-centered on the touchscreen.  
Repeat for the other three edges, ensuring the protective film is centered over the touchscreen 
when finished. 

1.  To remove the protective film, slide the protective film in one direction until the edge clears.  

Lift up on the edge of the film so it does not slide between the touchscreen and display 
housing when slid back.  Repeat until all edges are free and remove the protective film.