Руководство Пользователя для LXE vx7
Strain Relief Cable Clamps
75
E-EQ-VX7OGWW-H
VX7 User’s Guide
Strain Relief Cable Clamps
Equipment Required: Phillips screwdriver (not supplied by LXE)
There are strain relief cable clamps secured to the back of the VX7. Use the strain relief clamps to
secure audio, power, and I/O cables attached to the VX7.
secure audio, power, and I/O cables attached to the VX7.
Figure 70 Strain Relief Cable Clamps
1. Remove the strain relief clamp from the back of the VX7 by turning the screw
counterclockwise. Put the screw aside in a safe location.
2. Slide the strain relief clamp over the cable.
Figure 71 Slide Clamp Over Cable
3. Using a Phillips screwdriver and the screw that was removed, refasten the clamp holding the
cable to the VX7. Do not stretch the cable. Leave enough slack in the cable to allow it to be
connected and disconnected easily when needed.
connected and disconnected easily when needed.
4. Continue in this manner until all cables are secured to the VX7.