Справочное Руководство для LXE vx7

Reflash the VX7 

141 

E-EQ-VX7RG-H 

VX7 Reference Guide 

Requirements: 

•  A screwdriver (not supplied by LXE) 
•  PCMCIA to CF card adapter 

•  LXE recommends that installation of the CF card be performed on a clean, well-lit 

surface. 

•  Loosen the captive screws securing the user access panel cover.  The cover is 

tethered to the VX7. 

Make sure the VX7 has an uninterrupted power connection before beginning the 
reflash procedure.  Loss of power during the reflash process can result in 
corrupted files. 

 – Please contact LXE Customer Support for information on upgrading Windows 

CE .NET to Windows CE 5.0.  These instructions are only valid for upgrading to another 
revision of the same operating system. 

 

For information on identifying the platform version of your VX7, please see 
“Identifying your VX7” in Chapter 2, “Physical Description and Layout”. 

1.  Place the PCMCIA adapter containing the CF card with new image files on it in the PCMCIA 

slot next to the radio. 

2.  Double-click My Computer, then Storage Card folder. 

3.  Select NK.BIN, EBOOT.NB0, XSCALE.BIT. Select Edit | Copy. 

4.  Tap Back Arrow. Doubleclick \System folder. 

5.  Select Edit | Paste. When asked “Overwrite ?”, click Yes to All. 

6.  When the copy process finishes, remove the he PCMCIA adapter containing the CF card. 

7.  Select Start | Run and type Coldboot. 

8.  Select one of the options below, as appropriate: 

•  Wait for the “Loading system from ATA” toolbar to appear.  When it does, press 

and release the Power button.  When the “Press power switch again for 
confirmation” message appears, the Power button must be pressed and released in 
the next three seconds to confirm the reload.  If the Power button is not pressed 
during the three second period, the operating system resumes loading.