Справочное Руководство для LXE vx7

228 

Cisco Radio 

VX7 Reference Guide 

E-EQ-VX7RG-H 

 

Wi-Fi Protected Access (WPA) is only available on VX7’s equipped with the 
updated Cisco radio driver (release 2.60 or later). 

 

WPA requires software revision 1ED or greater.  To identify the software revision, 
please click on the “About” icon in the Windows CE Control Panel.  

 

Please refer to the “LXE Security Primer” to prepare the Authentication Server and 
Access Point for VX7 communication. 

 

It is important that all dates are correct on CE computers when using any type of 
certificate. Certificates are date sensitive and if the date is not correct authentication 
will fail. 

To support Wi-Fi Protected Access (WPA), the VX7 must be equipped as follows: 

•  Cisco 350 radio card with driver release 2.60 (or later). 

The LXE VX7 supports WPA and all authentications.  The Microsoft supplicant and Cisco 
supplicants are used separately or together to provide support for the different authentications.  

Most of the configuration is done with the Microsoft Wireless Configuration tool WPA/LEAP 
requires the Cisco supplicant and configuration tool. 

Which version of the Cisco driver should be installed depends on what authentication protocol is 
to be configured.   

•  Cisco PEAP should not be installed if using PEAP/MSCHAP. 
•  Cisco PEAP must be installed if using PEAP/GTC. 
•  For all other authentications (LEAP, EAP-TLS, WPA-PSK) it does not matter if 

Cisco PEAP is installed or not. 

To determine if Cisco PEAP is installed or to change the installation, follow the instructions 
below.