Руководство Пользователя для LXE vx3plus
Strain Relief Cable Clamps
29
E-EQ-VX3PLUSOGWW-B
VX3Plus User’s Guide
Strain Relief Cable Clamps
Equipment Required: Phillips screwdriver (not supplied by LXE)
There are two strain relief cable clamps secured to the VX3Plus endcap. Use the strain relief
clamps to secure audio, power, and I/O cables attached to the VX3Plus.
clamps to secure audio, power, and I/O cables attached to the VX3Plus.
RS-232
USB-C
Figure 16 Strain Relief Cable Clamps
1. Remove the strain relief clamp from the endcap by turning the screw counterclockwise. Put
the screw aside in a safe location.
2. Slide the strain relief clamp over the cable.
Figure 17 Slide Clamp Over Cable
3. Using a Phillips screwdriver and the screw that was removed, refasten the clamp holding the
cable to the endcap. Do not stretch the cable. Leave enough slack in the cable to allow it to be
connected and disconnected easily when needed.
connected and disconnected easily when needed.
4. Continue in this manner until all cables are secured to the endcap.