Краткое Руководство По Установке для Adidas adh1163

4

1. Pull crown out to position 2.

2. Turn crown counter-clockwise to set the date.

3. After the date has been set, push crown back to position 1.

This chronograph is able to measure and display time in 1/20(1/1) second united up 

to maximum of 12 hours. The retrograde chronograph 1/20(1/1) second hand runs 

continuously for 60 seconds after starting, and then stops at the zero position.

Measuring time with the chronograph
1. Press B to change the watch to chronograph mode. The second hand stops at zero, 

and changes to the chronograph 1/20(1/1) second hand.

2. The chronograph can be started and stopped each time A is pressed. The 

chronograph 1/20(1/1) second hand stops at zero, 60 seconds after starting. When 

A is pressed to stop the chronograph, the chronograph 1/20(1/1) second hand 

advances rapidly to display the measured time.

3. Pressing B resets the chronograph and all hands return to their zero positions.

 Actual measurement will be 

This procedure should be performed when the chronograph second hand and 

chronograph 1/20(1/1) second hand do not return to zero after the chronograph has 

been reset, and including after the battery has been replaced.

1. Pull crown out to position 3.

2. Press A to set the chronograph second hand to zero.

3. Press B to set the chronograph 1/20 second hand to zero. The chronograph hands 

can be advanced rapidly by continuously pressing A or B.

4. Once the hands have been set to zero, reset the time and return the crown to 

position 1.

5. Press B to check that the chronograph hands are reset to zero.