Сетевое Руководство для Ricoh 3224C
Using a Printer Server
64
3
T
Select the [Define additional proper-
ties]
ties]
check box, and then click
[Create]
.
U
Click [Assignments], and then click
[Add]
[Add]
in the [Assignments] area.
V
In the [Available objects] box, click
the queue you created, and then
click [OK].
the queue you created, and then
click [OK].
W
Check the settings, and then click
[OK]
[OK]
.
X
Start the print server by entering
the following from the console of
the NetWare server.
If the print server is in operation,
quit and restart it.
the following from the console of
the NetWare server.
If the print server is in operation,
quit and restart it.
❖ To exit
CAREE: unload pserver
❖ To start
C A R E E : l o a d p s e r v e r
print_server_name
print_server_name
Setting Up as a Remote Printer
(NetWare 3.x)
(NetWare 3.x)
Follow the procedure below to use
the printer as a remote printer under
NetWare 3.x.
the printer as a remote printer under
NetWare 3.x.
Setting up using NIB Setup Tool
A
Log on to the file server as a su-
pervisor or supervisor equivalent.
pervisor or supervisor equivalent.
B
Start NIB Setup Tool from [Start]
menu.
menu.
C
Click [Property Sheet], and then
click [OK].
click [OK].
D
Select a printer you want to con-
figure.
figure.
E
On the [NetWare] tab, enter the
name of the print server in the
[Print Server Name:]
name of the print server in the
[Print Server Name:]
box.
F
In the [File Server Name:] box, enter
the name of the file server in
which a print server is created.
You can also click [Browse...] to
browse through available file serv-
ers.
the name of the file server in
which a print server is created.
You can also click [Browse...] to
browse through available file serv-
ers.
G
In the [Print Server Operation Mode]
area, click [As Remote Printer].
area, click [As Remote Printer].
H
In the [Remote Printer No.] box, en-
ter the printer number.
Use the same printer number cre-
ated in the print server.
ter the printer number.
Use the same printer number cre-
ated in the print server.
I
A confirmation message appears.
Click [OK].
Click [OK].
J
On the [NIB] menu, click [Exit].
Setting up using PCONSOLE
A
Enter “PCONSOLE” from the com-
mand prompt.
mand prompt.
F:> PCONSOLE
B
Create a print queue.
When using the existing print
queue, go to the procedure for cre-
ating a printer.
When using the existing print
queue, go to the procedure for cre-
ating a printer.
C
From the [Available Options] menu,
select [Print Queue Information], and
then press the
select [Print Queue Information], and
then press the
{Enter} key.
D
Press
{Insert} key, and then enter a
print queue name.
E
Press
{ESC} key to return to the
[Available Options]
menu.
F
Set up the network connection to
a printer.
a printer.