Руководство По Программному Обеспечению для Ricoh c410dn

Monitoring and Configuring the Printer

202

❖ Interface priority configuration

• You can give interface's AutoNet parameter priority.
• Priority settings are available when multiple interfaces are installed.
• wlan can be specified only when the IEEE 802.11b interface is installed.

❒ If an interface is not selected, the current interface connection settings remain

in effect.

For details about AutoNet, refer to autonet parameters.

Use the “bonjour(rendezvous)” command to display bonjour(rendezvous)-re-
lated settings.

❖ View settings

Bonjour settings are displayed.

❖ Bonjour service name setting

You can specify the bonjour service name.

• The computer name can be entered using up to 63 alphanumeric characters.

❖ Bonjour Installation location information setting

You can enter information about the location where the printer is installed.

• Information about location can be entered using up to 32 alphanumeric

characters.

❖ Setting order of priority for each protocol

• diprint

• lpr

• ipp

You can specify the order of priority for “diprint”, “lpr”, and “ipp”. Smaller
numbers indicate higher priority.

ether

Ethernet interface

wlan

IEEE 802.11b interface