Руководство По Программному Обеспечению для Ricoh c410dn

Remote Maintenance by telnet

229

wins

Use the “wins” command to configure WINS server settings.

❖ Viewing settings

msh> wins

• If the IPv4 address obtained from DHCP differs from the WINS IPv4 ad-

dress, the DHCP address is the valid address.

❖ Configuration

msh> wins “interface_name” {on | off}

• {on} means “active” and {off} means “inactive”.
• Be sure to specify the interface.
• wlan can be specified only when the IEEE 802.11b interface is installed.

❖ Address configuration

Use the following command to configure a WINS server IP address:

msh> wins “interface_name” {primary|secondary} “IP ad-
dress”

• Use the “primary” command to configure a primary WINS server IPv4 ad-

dress.

• Use the “secondary” command to configure a secondary WINS server IPv4

address.

• Do not use “255.255.255.255” as the IPv4 address.

❖ NBT (NetBIOS over TCP/IP) Scope ID Selection

You can specify the NBT scope ID.

msh> wins “interface_name” scope “scope ID”

• The scope ID can be entered using up to 31 alphanumeric characters.
• Be sure to specify the interface.
• wlan can be specified only when the IEEE 802.11b interface is installed.

Interface name

Interface configured

ether

Ethernet interface

wlan

IEEE 802.11b interface