Эксплуатация Оборудования для Ricoh c410dn
Replacing the Maintenance Kit
123
6
Replacing the Maintenance Kit
R WARNING:
R CAUTION:
❖ When to replace the Maintenance Kit
Replace Maintenance Kit if the following messages appear on the display:
• “Replace Maintenance Kit.”
• “Replace Maintenance Kit.”
Before Replacing
The Maintenance Kit contains parts for maintaining the printer.
Replace all the parts included in the Maintenance Kit at the same time. Replace
them according to the following procedure.
Replace all the parts included in the Maintenance Kit at the same time. Replace
them according to the following procedure.
A
Turn off the power, and then unplug the power cable.
Important
❒ Wait at least an hour after power off to allow internal parts to cool down
before replacing the Maintenance Kit.
B
Check the box contains the following items:
• Friction Pad
• Friction Pad
× 3
• Paper Feed Roller
× 3
• Transfer Roller
• Fusing Unit
• Dustproof Filter
× 2
• Do not risk electric shock by handling the power cord or plug with wet
hands.
• The inside of this printer becomes very hot. Do not touch parts labelled “v”
(indicating a hot surface). Touching these parts will result in burns.
• Grip the plug, not the cord, when pulling the plug from the socket. Pulling
the cord causes wear and tear that can result in fire or electric shock.
• Wait at least one hour after power off before replacing parts. Not allowing
the printer to cool may result in burns.