Эксплуатация Оборудования для Ricoh sp c320dn
Wireless LAN Configuration
Configure the following Wireless LAN settings according to the network environment using the control
panel.
panel.
• Ethernet and Wireless LAN cannot be used at the same time.
• To use Wireless LAN, set as follows using the control panel: press the [Menu] key, select [Host
• To use Wireless LAN, set as follows using the control panel: press the [Menu] key, select [Host
Interface], [Network], [LAN Type], and then select [Wireless LAN]. In addition, you must set the IP
address, subnet mask, gateway address, DHCP, Frame Type (NW), and active protocol as explained
in "Ethernet Configuration".
address, subnet mask, gateway address, DHCP, Frame Type (NW), and active protocol as explained
in "Ethernet Configuration".
• The following table shows the control panel settings and their defaults. These items appear in the
[Wireless LAN] under [Host Interface] menu.
Setting Name
Default
Communication Mode
Infrastructure Mode
SSID Setting
blank
Ad-hoc Channel
11
Security Method
Off
Wireless LAN Signal
-
Restore Defaults
-
1.
Press the [Menu] key.
CBK049
5. Configuration
88
5